Airco Zibro P639

-Weg wegens installatie vaste airco.

-Enkel afhaling te Brugge met 2 personen , moet van 2de     verdieping naar beneden.-Gebruiksaanwijzing aanwezig.

PRODUCT INFO

Product range: mobile air conditioners
Brand: name Zibro
Model: P 639
Colour: silver/black
EAN code: 8713508725505


TECHNICAL SPECIFICATIONS

EER* W/W              3.0
Operating range     18 - 32 °C
Energy Efficiency Class    B
Noise level min.-max. 49-60 dB
Cooling capacity *   3.9 kW
Fan speed              3 pos. (2+1 turbo)
Power consumption  1.3 kW
Control                    electronic + remote
Mains voltage          220-240 V / 50 Hz, 1 Ph
Refrigerant              R-407c/720 gr
Amperage               6.0 A
Dimensions (w x d x h) 540x480x800 mm
Air flow (max.)      530 m3/h
Weight                     39 kg
For rooms up to    120 m3
Compressor type     rotary
Moisture removal * 36 L/d
Protection class        IP 21
Watercontainer capacity   1.5 L

• EN 14511   

To be used as indication

• Moisture removal at 32°C, 80% RH

FEATURES
Electronic controls: The unit is equipped with a circular LCD-display and electronic touch controls.

LCD-display remote control: This unit can be operated with an easy to handle remote control.

Clock: The LCD display, on the aircon and remote control can show the actual time.

Temperature setting: When switched on the LCD-display will show the room temperature. The desired temperature can be set between 18 and 32°C. Note: result is up to specific room conditions.

Fan speed setting: Select the fan speed: low, normal or high. The LCD display, on the aircon and remote control will show the chosen speed.

Timer: Operating time to be set between 5 minutes and 24 hours. The unit switches off or on automatically when the set time has run down. Besides this the unit can be swit- ched on or off for a pre-determined period. The unit will repeat the timer setting daily.

Sleep timer: The set temperature will increase 1 °C after 1 hour and another 1 °C after
2 hours when running in cool mode. The unit will operate in the low silent fan mode.

Air conditioning: The unit produces, with relatively high energy efficiency (A-rating), a pleasant and refreshing high capacity cool airflow. Unhealthy particles are captured by the air filters. Performance is optimal when the entering of outside air to the room is avoided.

3-layer air filter: The air conditioner is equipped with a 3 layer filter package to clean the circulated room air. The 3M Filtrete™ air filter delivered together with this unit captures allergens like bacteria, dust and pollen from the circulated air with an efficiency up to 80%. Pollen are well known as an important stimulus for hay-fever allergy.
The active carbon filter removes unpleasant odours from the air and the screen filter captures large dust particles. The screen filter can be cleaned with a vacuum cleaner and/or lukewarm water.

Filter package: Per season 2 to 3, 3M Filtrete™ and active carbon filters will be used. These filters are available in a consumer package (including 1 3M Filtrete™ and 1 active carbon filter).

Airflow: Move the air vent direction by adjusting the grill on top of the air conditioner and by moving the vertical louvers.

Cooldown effect: The unit removes humidity by condensation. The condensate cools the condenser and is removed by the hot air discharge. This will increase the energy efficiency; the so called “cool down” effect.

Dehumidification: The unit can also be used as dehumidifier only. In that case the exhaust hose is not connected and warm air returns in the room.

Cord storage compartment: For convenient storage, the power supply cord can be put in an integrated compartment at the backside of the unit.

Continuous drainage: In case of use as dehumidifier only it is necessary to connect a continuous drainage tube (ø 20 mm inner diameter) to the unit.

Exhaust duct: Hot air and humidity is transported, by an easy to install exhaust duct, outside the room.

Window fitting kit: The adaptor at the end of the exhaust duct fits into an adjustable slide bar, which can be placed between the window and the window frame. This refrains warm air from re-entering the room.

Wall fitting kit (optional): A connector can be supplied to be fitted into a wall or window for permanent connection with the exhaust duct. A cap is included to cover the opening when the air conditioner is not in use.

Design: Modern, high quality and exclusive Zibro design including LCD-displays on the unit as well as on the remote control.

Full colour box: The unit is delivered complete with auxiliary parts in a stylish full colour box showing application and operation information in 10 languages.