2 Nikon LS-1000 coolscan dia scanner met SF-100 slide feeder

Complete set in originele verpakking

• 2 x Nikon LS-1000 coolscan dia scanner
• 1 x SF-100 slide feeder
• 1 x PCI SCSI controller (Adaptec AHA-2940)
• 1 x SCSI kabel
• 1 x SCSI terminator
• Originele handleidingen en software

Informatie uit de handleiding
The LS-1000 is a film scanner capable of scanning 35mm film
(color/monochrome, negative/positive) at high speed and high
resolution.

• 3-color, high-brightness LED illuminant, eliminating the need for illuminant maintenance
• High-speed single-pass scanning capability
• High quality images produced by using a 12-bit A/D converter
• Maximum pixel count of 2,592 x 3,888 and high resolution of 2,700dpi
• Auto-focus function, eliminating the need for manual focusing
• Compact, lightweight design, with low power consumption
• Consecutive automatic scanning capability with the optional auto slide feeder

LS-1000 Specifications
Film used:
35mm film (color/monochrome, negative/positive)
Mounted slides (3.0mm or less and 1.1mm or more in thickness)
Strip film (up to 6 images)
Scanning method:
Stepper-driven film stage, single pass method
Sensor:
2,592 pixel linear CCD image sensor
Light source:
RGB LED Array
Color separation:
RGB line sequential
Scanning area:
24.3 x 36.5mm, 2,592 x 3,888 pixels.
Strip film holder aperture is 23.4 x 35.4mm.
Scanning resolution:
Pixel size: 9.4 micron square pixel
Pixel density: 106 pixels/mm, 2,700 dpi (on film surface)
A/D conversion:
12 bits/color
Output data:
Full color (8 bits/color)
Focus:
Auto-focus
Film holder:
Not required for mounted slide scanning.
FH-2 is used for strip film scanning.
Interface:
SCSI-2 compliant
Size:
6.0 (W) x 10.5 (H) x 2.5 (D) inches
(151 x 267.5 x 63.3mm)
Weight:
Approx. 4.2lbs (1.9kg)
Power supply:
AC 100 - 120V/AC 200 - 240V, 50/60Hz,0.80 - 0.4A

SF-100 Specifications
Film used:
35mm mounted slides of 1.1 - 3.0mm in thickness
Maximum number of slides:
About 50 1.6mm thick mounted slides
(Magazine space: approx. 80mm)
Connection:
Directly connected to front panel connector of vertically installed LS-1000.
Reference insertion/ejection time:
Insertion: approx. 10 seconds
Ejection: approx. 10 seconds
Power source:
Supplied by LS-1000. DC 12V 350mA or lower, DC 5V 30mA or lower.
Size:
5.1(W) x 7.8(D) x 6.2(H) inches
(130 x 199 x 156.5mm)
Weight:
Approx. 1.8 lbs (0.8kg)