Roller conversion kit Cam follower Audi S3 8P, VW Golf 5 GTI

Roller conversion kit Cam follower Audi S3 8P, VW Golf 5 GTI, 6R 2.0 TFSI EA113

Tired of defective pump tappets? The roller tappet kit for the 2.0L TFSI high pressure pump offers the optimal solution!

The conversion kit to roller tappets has the advantage that the contact surface of the cam is much larger than the original cup tappet. As a result, the force can be distributed better and less friction and shear forces are generated at one point. This makes defective pump tappets a thing of the past. Defective pump tappets can irreparably damage the cam on the camshaft. Thus, the intake camshaft must be completely replaced. In addition, chips resulting from the defect can fall into the oil pan. There the balance shaft module sits together with the oil pump. A damage at this module causes mostly a capital engine damage.

Another advantage is the better guidance of the pump piston. Thus a leakage of the high pressure pump is prevented. The shaft seal of the high pressure pump can leak over time and fuel gets into the oil circuit. Consequently, the oil loses its lubricating properties and bearing damage occurs at the connecting rods!

Included in the kit is:

• Roller plunger for the high pressure pump
• Spring with adjusted spring rate
• New gasket for chain case
• Adapter flange CNC milled
• Screws with washers galvanized
  

The original camshaft housing must be machined.

Audi S3 8P 2.0 TFSI

Audi TT 8J 2.0 TFSI

Audi TTS 8J 2.0 TFSI

Seat Leon 1P 2.0 TFSI

Seat Leon 1P Cupra

Skoda Octavia 1Z vRS

Volkswagen Golf 5 GTI

Volkswagen Golf 6 GTI

Volkswagen Golf 6 GTI ED35

Volkswagen Golf 6 R
Volkswagen Scirocco III 2.0 TSI

Volkswagen Scirocco III R

Volkswagen Polo 6R WRC